Installation Guide

Canterbury

Model Number Speciﬁcation

Modiﬁcations

Dimensions

Note: Dimensions subject to change without notice.

Compliance

Warranty

Limited Lifetime - to the original end purchaser in

consumer installations.

5 Years - for commercial installations.

Refer to www.symmons.com/warranty for complete

warranty information.Note: Append appropriate -sufx to model number.

4-163

1 Mode Showerhead

Operation & Maintenance Manual

☐

4-163 1 Mode Showerhead

☐

-1.5 1.5 gpm (5.7 L/min) ﬂow restrictor

☐

-2.0 2.0 gpm (7.6 L/min) ﬂow restrictor

☐

-STN Satin Nickel ﬁnish

• 1 mode showerhead

• 2.5 gpm (9.5 L/min) standard ow restrictor

• Showerhead shall be metal construction, plated in

standard polished chrome nish

- ASME A112.18.1/CSA B125.1

- WaterSense 1.5 gpm & 2.0 gpm

Measurements

A 1/2-14 NPT

B 3-7/8", 98 mm

C Ø 3-7/8", 98 mm

Certied by

CSA Group

PAGE 1
Canterbury ® 4-163 1 Mode Showerhead Operation & Maintenance Manual Model Number ☐ 4-163 Specification 1 Mode Showerhead Modifications ☐ -1.5 ☐ -2.0 CG ☐ -STN • • • 1 mode showerhead 2.5 gpm (9.5 L/min) standard flow restrictor Showerhead shall be metal construction, plated in standard polished chrome finish Compliance 1.5 gpm (5.7 L/min) flow restrictor 2.0 gpm (7.6 L/min) flow restrictor - ASME A112.18.1/CSA B125.1 - WaterSense 1.5 gpm & 2.
PAGE 2
Installation 1) Install showerhead to shower arm (not included) turning clockwise to tighten. Tools Required Plumber Tape 1 2 Care and Cleaning 1) Clean finished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse with water. Troubleshooting Chart Problem Cause Solution Finish is spotting. Elements in water supply may cause water staining on finish.