Full Product Manual

3
Installation
1) Measure and mark centerlines
for mounting bracket installation
using dimensions on page 2.
3) With mounting brackets in posi-
tion, secure to wall using screws.
5) Hang top of accessory on mount-
ing bracket. Lower into position.
2a) Dry Wall Option: Place
mounting brackets into desired
position. Using brackets as a
guide, carefully drill 5/16" holes
into wall. Remove brackets and
install anchors.
2b) Stud Option: Center bracket on
centerline. Using brackets as a
guide, carefully drill 3/16" holes
into wall.
Note:
363DTB-18, 363DTB-24, 363TB-18,
363TB-24, 363TS-22 only. Make
sure both centerline marks are level.
3
3
1
2
Note:
For plaster walls 1/2" thick or
less, insert toggle tool into toggle
to secure behind wall prior to
installing accessory trim.
1
2
1
2
4) Secure with set screw.
1
2
363-SD2 Only: Carefully drill 5/16"
holes into wall and install anchors.
Secure to wall using screws.