Specification

3
Installation (Wall & Wall Studs)
Installation (Ceramic Tile)
2) Use drill with 7/64" drill bit to drill
pilot holes into wall studs through
ceramic tile.
3) Follow steps 3, 4, 5 and 6 for
wall and wall studs to complete
installation of Toilet Paper Holder
onto ceramic tile.
1) Place Toilet Paper Holder at desired
position. Mark the centers on each
end with a pencil.
2) Remove Toilet Paper Holder from
wall. Use drill with 7/64" drill bit to
drill holes into wall and wall studs at
the marked positions.
3) Use ratchet and lag bolt to attach
mounting bracket to wall. Do
not overtighten. Repeat step for
opposite end, and then tighten both
brackets so they are secured to wall.
4) Attach ends of Toilet Paper Holder
to mounting brackets.
5) Secure Toilet Paper Holder end with
set screw. Repeat step for opposite
end.
6) Apply a bead of silicone around
the perimeter of the Toilet Paper
Holder ends to prevent water from
bleeding through the mounting holes
and potentially damaging the wall
and wall studs.
1) Follow step 1 for wall and wall studs
to mark centers of Toilet Paper
Holder ends. Use drill with 5/16"
carbide tip drill bit to drill holes into
ceramic tile at the marked positions
to prevent damage to the tiles.