Specification
2
Parts Breakdown
WALL STUD
WALL
MOUNTING
ANCHOR FOR
DRYWALL
APPLICATIONS
IMPORTANT NOTES FOR PROPER INSTALLATION
DO NOT install this product without rst reading and understanding the instructions. If you are unable to understand
these warnings and instructions, contact professional or technical personnel for assistance - otherwise injury may occur.
Toilet Paper Holder Location
• For proper mounting heights and location consult with your state and local code ofcial having jurisdiction over the
installation.
Solid Support
• Toilet Paper Holder ends can be mounted with both end positions over a wall stud. A stud nder can be used to
locate wall studs. Contractor is responsible for installing Toilet Paper Holder to wall studs as instructed.
• For drywall applications one end of Toilet Paper Holder must be positioned over a wall stud while the mounting
bracket is used to secure the opposite end.
• Secure through wall board or tile to the wall stud so as to hold a minimum of 250 pounds of force.
Tools Required for All Installations
3/8" Drill
7/16" Hex Socket with
3/8" Drive Ratchet
Pencil
Phillips Head
Screwdriver
Safety Glasses
Silicone
Stud Finder
Drill Bit Sizes
Installing to Wall Studs Only
Wall Stud Pilot Hole:
7/64" Drill Bit
Through Ceramic Tile:
5/16" Carbide Tip Drill Bit
Installing Mounting Anchor
Drywall Pilot Hole:
1" Drill Bit
Through Ceramic Tile:
1" Carbide Tip Drill Bit