Installation Guide

Duro
®
Model Numbers Specification
361TS, 361DTS
Tub Spout Series
Operation & Maintenance Manual
☐
361TS Non-Diverter Tub Spout
☐
361DTS Diverter Tub Spout
☐
361TS-SS Non-Diverter Slip Spout
☐
361DTS-SS Diverter Slip Spout
Dimensions
Measurements
A 2-1/4", 57 mm
B 2-1/2", 64 mm
C
Male 1/2-14 NPT tting
must protrude
3-7/8" (98 mm)
from nished wall
D 5/8", 16 mm
E 5-5/8", 143 mm
F
1/2" rigid copper tubing
must protrude
Min. 1-3/4" (44 mm)
Max. 2-3/4" (70 mm)
from nished wall
Note: Dimensions subject to change without notice.
AA
BB
CC DD
EE
AA
BB
CC DD
EE
361TS361TS
361DTS361DTS
F
F
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Warranty
Note: Append appropriate -sufx to model number.
Options/Modifications
☐
-BBZ Brushed Bronze finish
☐
-MB Matte Black finish
☐
-STN Satin Nickel finish
• 5-5/8" length
• Pull-up diverter (361DTS)
• Thread on installation
• Optional slip spout with 1/2" inlet
• Metal construction plated in standard polished chrome
nish
Compliance
-ASME A112.18.1/CSA B125.1
WARNING: This product can expose you to chemicals
including lead, which is known to the state of
California to cause cancer, birth defects, or other
reproductive harm. For more information, go to
www.P65Warnings.ca.gov.