Specification

ManualsBrandsSymmons ManualsPlumbingDuro 1-Handle Wall-Mounted Shower Valve Trim Kit in Satin Nickel (Valve not Included)

Duro

Feature Highlights Options/Modiﬁcations

3600-TRM, 3600TRMTC

Shower Valve Trim

Speciﬁcation Submittal

Location:

• Duro Shower Valve Trim

• Requires Temptrol

Pressure Balancing Shower Valve

• Metal lever handle

• Showerhead not included

• Tub spout not included

• Components shall be metal and nonmetallic construction, plated in

standard Polished Chrome nish

• Available with TA-10 ow control spindle and T-12A cap assembly

for Temptrol valve bodies installed with Test Cap

(order p/n 3600TRMTC)

• ASME A112.18.1/CSA B125.1

Model Numbers

☐

3600-TRM

Shower Trim, Temptrol Pressure Balancing Shower Valve ordered

separately

☐

3600TRMTC

Shower Trim with TA-10 ow control spindle and

T-12A cap assembly, must order Temptrol valve with Test Cap

Compliance

Warranty

Limited Lifetime - to the original end purchaser in

consumer/residential installations.

5 Years - for industrial/commercial installations.

Refer to www.symmons.com/warranty for complete warranty information.

Go to www.symmons.com/register to register your Symmons product.

Note: Append appropriate -sufx to model number.

☐

-REB Rebuild trim kit, includes TA-10 and TA-4

☐

-VP Vandal resistant escutcheon screws in place of

standard screws

☐

-BBZ Brushed Bronze ﬁnish

☐

-MB Matte Black ﬁnish

☐

-STN Satin Nickel ﬁnish

Summary of content (2 pages)

PAGE 1
Location: Duro ® 3600-TRM, 3600TRMTC Shower Valve Trim Specification Submittal Feature Highlights • • • • • • • Duro Shower Valve Trim Requires Temptrol® Pressure Balancing Shower Valve Metal lever handle Showerhead not included Tub spout not included Components shall be metal and nonmetallic construction, plated in standard Polished Chrome finish Available with TA-10 flow control spindle and T-12A cap assembly for Temptrol valve bodies installed with Test Cap (order p/n 3600TRMTC) Options/Modification
PAGE 2
Dimensions Measurements A B C D E Sq. 7-1/2", 191 mm Ref. 42", 1067 mm 3-1/8", 79 mm 3-1/2", 89 mm Rough-in 2-3/8" ± 1/2", 60 mm ± 13 mm A C D B E FLOOR Notes: 1) Valve body and piping not included and shown as reference only. 2) Plaster shield (p/n T-176) for dry wall, plaster or other type walls 1/2" or greater. 3) All dimensions measured from nominal rough-in (see E as reference). 4) Dimensions subject to change without notice. Symmons Industries, Inc.