Installation Guide

For California Residents
WARNING: This product contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: [phone] ■ Fax: [phone]
Copyright © 2017 Symmons Industries, Inc. ■ symmons.com ■ [e-mail] ■ ZV-3015 REV D ■ 112717
Troubleshooting
Problem Cause Solution
Finish is spotting.
Elements in water supply may cause
water staining on nish.
Clean nished trim area with a soft
cloth using mild soap and water or a
non-abrasive cleaner and then quickly
rinse with water.
Installation
1) Position mounting brackets into
desired location. Mark hole positions
with pencil.
3) With mounting brackets in position,
secure to wall using screws.
4) Insert rod brackets into mounting
brackets and secure with Allen
screws.
1
5) Insert shower rod into rod brackets
and secure with Allen screws.
2b) Dry Wall Option: Carefully drill
1/4" holes into wall. Install drywall
anchors into holes.
2a) Stud Option: Carefully drill 3/16"
holes through wall and up to studs.
2
2
1
2c) Tile Option: Carefully drill 5/16"
holes into tile. Install tile anchors
into holes.
2
2
1