Installation Guide
Dia
®
Model Numbers Specification
353SR-5, 353SR-6
Curved Shower Rod
Operation & Maintenance Manual
☐
353SR-5 5' Curved Shower Rod
☐
353SR-6 6' Curved Shower Rod
Dimensions & Tools Required
Measurements
A
60", 1524 mm (353SR-5)
72", 1829 mm (353SR-6)
B 2-1/8", 54 mm
C 10-1/2", 267 mm
Note: Dimensions subject to change without notice.
Finish Options
Limited Lifetime - to the original end purchaser in
consumer/residential installations.
5 Years - for industrial/commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Warranty
Note: Append appropriate -sufx to model number.
☐
-STN Satin Nickel finish
• Curved shower rod
• Metal construction
AA
B
B
CC
For 60" Standard Tub
Mount rod approximately 3" inside the point a
straight rod is normally mounted. The midpoint
of the rod should extend several inches past the
outside rim of the tub.
For 60" Oval Tub
Depending upon tub model, mount rod between
6" and 8" from centerline of the tub. The middle
portion of the rod should curve just outside the
contour of the tub.
Tools Required
Drill:
3/8 inch for studs
1/4 inch for drywall
5/16 inch for tile
Pencil
Phillips Head
Screwdriver
Safety Glasses
Stud Finder