Installation Guide

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: [phone] ■ Fax: [phone]
©2015 Symmons Industries, Inc. ■ www.symmons.com ■ [e-mail] ■ ZV-3046 REV A ■ 020415
Installation Operation
1) Install showerhead to shower arm (not included)
turning clockwise to tighten.
1) Turn showerhead to desired mode of operation.
1
2
Troubleshooting Chart
Finish is spotting. Elements in water supply may cause
water staining on nish.
Clean nished trim area with a soft
cloth using mild soap and water or a
non-abrasive cleaner and then quickly
rinse with water.
Showerhead is leaking from shower
arm when valve is in “on” position.
Coupling connecting showerhead
to shower arm is cracked or washer
inside coupling is worn.
Inspect coupling and washer
and replace showerhead if
necessary.