Specification

12"
(305 mm)
nished wall
Floor
hot / cold
supply
showerhead
supply
5/8" (16 mm)
5-1/2"
(140 mm)
2-5/8"
(67 mm)
7-3/4" dia
(197 mm)
2-1/2" dia
(64 mm)
tub spout
supply
1/2"-14 NPT
mounting plate,
*
Note (1)
Temptrol
control valve
approx
45"
(1143 mm)
approx
32"
(813 mm)
7"
(178 mm)
Finished wall to rear of valve
3-1/2"
±
1/2" (89 mm
±
13 mm
Finished wall to pipe centerline
2-3/8"
±
1/2" (60 mm
±
13 mm)
*See note (2)
3"
(76 mm)
2-7/8
±
½"
(72 mm
±
13 mm)
*
Notes:
(1) Walls for using T-177 mounting plate (MP)
■ Wall is 1/16" (2 mm) min • 1/2" (13 mm) max
■ Fiber or acrylic walls (MP required)
■ Plaster or other type walls 1/2" or less (MP optional)
■ Protective shield usage (optional)
(2) Dry wall, plaster or other type walls 1/2" or greater
■ Protective shield is required; snaps on end of valve spindle...
(3) Do not install positive shut-off devices or devices that do not
allow the valve to ow at least 1.5 gpm on control valve outlets
(4) Dimensions subject to change without notice
Protective
Shield
p/n T-176
1/2"-14 NPT
Wall cutout hole size
3-1/2" (89 mm) min
4" (101 mm) min
Dimensions Dia Tub-Shower System, 3502-CYL-B
6-3/4" ±1/2"
(171 mm ±13 mm)
5-1/2"
(138 mm)
2-7/16"
(62 mm)
diameter
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone], [phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ Printed in U.S.A. ■ www.symmons.com ■ [e-mail] ■ 032614