Installation Guide

8. Installation - Shower Valve Trim

1) Secure large mounting plate to Temptrol

pressure balancing valve using mounting screws

(FIGURE 8.1).

2) Secure large shower escutcheon to mounting plate.

Tabs should snap in place (FIGURE 8.2).

3) Install dome cover by turning clockwise (FIGURE 8.3).

4) Install handle to shower valve. Secure with set screw

(FIGURE 8.4).

FIGURE 8.1

FIGURE 8.2

FIGURE 8.3

FIGURE 8.4

9. Installation - Diverter Valve Trim

2) Secure small diverter escutcheon to mounting plate.

Tabs should snap in place (FIGURE 9.2).

1) Secure small mounting plate to Symmons diverter valve

using mounting screws (FIGURE 9.1).

FIGURE 9.1

FIGURE 9.2

4) Install handle to diverter valve. Secure with set screw

(FIGURE 9.4).

FIGURE 9.4

3) Install dome cover by turning clockwise (FIGURE 9.3).

FIGURE 9.3

1) Attach arm and ﬂange to shower pipe. Turn clockwise

to tighten (FIGURE 10.1).

2) Install showerhead to shower arm. Turn clockwise to

tighten (FIGURE 10.2).

3) Install tub spout to stub out pipe. Turn clockwise to

tighten (FIGURE 10.3).

FIGURE 10.1

FIGURE 10.2

FIGURE 10.3

10. Installation - Showerhead & Tub Spout