Specification

nished wall
Floor
hot / cold
supply
showerhead
supply
5/8" (16 mm)
7-3/4" dia
(197 mm)
Temptrol
control valve
valve mounting plate,
*
Notes (1)(2)
COLD
supply
showerhead
supply
HOT
supply
*
Notes:
(1) Walls for using T-177 mounting plate (MP)
■ Wall is 1/16" (2 mm) min • 1/2" (13 mm) max
■ Fiber or acrylic walls (MP required)
■ Plaster or other type walls 1/2" or less (MP optional)
■ Protective shield usage (optional)
(2) Dry wall, plaster or other type walls 1/2" or greater
■ Protective shield is required; snaps on end of valve spindle...
(3) Dimensions subject to change without notice
Finished wall to rear of valve
3-1/2"
±
1/2" (89 mm
±
13 mm
Finished wall to pipe centerline
2-3/8"
±
1/2" (60 mm
±
13 mm)
*See note (2)
Protective Shield
p/n T-176
3"
(76 mm)
2-7/8
±
½"
(72 mm
±
13 mm)
Dimensions Dia Shower Valve System, 3500-CYL-B
Wall cutout hole size
3-1/2" (89 mm) min
4" (101 mm) min
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ [phone], [phone] ■ Fax: [phone]
©2012 Symmons Industries, Inc. ■ Printed in U.S.A. ■ www.symmons.com ■ [e-mail] ■ 061312