Installation Guide

Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: [phone] ■ Fax: [phone]
Copyright © 2019 Symmons Industries, Inc. ■ symmons.com ■ [e-mail] ■ ZV-3192 REV C ■ 071719
Installation
D
2
1) Place mounting bracket (D) into
desired position and mark drill
hole locations. Drill two 5/16”
(8 mm) holes into wall.
4) Attach escutcheon (B) to mounting
bracket (D).
3) Reposition mounting bracket (D)
on toggle anchors (E) and secure
to wall using two screws (C).
C
1
C
D
E
E
2
B
D
1
*Note: For plaster walls 1/2” thick
or less, insert toggle tool (F) into
toggle anchors (E) to secure behind
wall prior to installing trim.
2) Insert two toggle anchors (E) into
drill holes.
1
1
E
E
F
1*
E
5) Attach toilet paper holder arm (A)
to mounting bracket (D) so arm
sits ush with escutcheon (B).
B
A
1
D
6) Secure toilet paper holder arm (A)
to escutcheon (B) and mounting
bracket (D) with set screws (G).
G
1
A
B
D
Problem Cause Solution
Finish is spotting
Elements in water supply may cause
water staining on nish.
Clean nished trim area with a soft
cloth using mild soap and water or a
non-abrasive cleaner and then quickly
rinse with water.