Time & Frequency System Brochure

997-01530-01, Rev. C-25, Jan 2008 127
2
5
1
SSSSSSSSSSSS SSSS SSSSSS SSSSSSS S SSS SSSSSSS
The XL-GPS Fault Group
Note: For the figures in this chapter, substitute “xlgps” for “xli”.
The XL-GPS systemAlarmData group defines SNMP traps and cannot be directly retrieved by the SNMP
manager. When a system alarm event occurs an SNMP trap alarmSystemNotification is sent to the
SNMP managers previously configured to receive traps. Included in the trap message are the variables
contained in the systemAlarmData group: IP address, timestamp, alarm code, and the F73 status string.
systemFault
= 1
systemAlarmData
= 1
systemFault
Config
= 2
system Fault
ConfigData
= 1
system Fault
ConfigMasks
= 2
alarm DataIpAddr = 1
alarm DataTimeStamp = 2
alarm DataCode = 3
alarm DataStatus - = 4
Descriptor
system Fault
History
= 3
faultP llS ynthe sizer = 1
faultLpnP ll = 2
faultPrim aryG P S = 3
faultSecondaryGPS = 4
faultIR IG = 5
faultAuxRef = 6
faultPrim aryPow er = 7
faultSecondaryPower = 8
faultRbO sc = 9
faultTimeErrorThreshold = 10
faultClockLockStatus = 11
faultO scillato rT uning = 12
m askP llS ynthesizer = 1
maskLpnPll = 2
maskPrimaryGPS = 3
maskSecondaryGPS = 4
m askIR IG = 5
maskAuxRef = 6
maskPrimaryPower = 7
maskSecondaryPower = 8
maskRbOsc = 9
m askTim eE rrorThreshold = 10
maskClockLockStatus = 11
m askO scillatorT uning = 12
configD ataLatch = 1
configD ataLatchClear = 2
configDataThreshold = 3
configD ataTim eout = 4
configD ataP owerO n - = 5
Suppress
xliS ystem
= 1
system Status
= 2