User Manual
Transmission Speed Setting
Choosing the transmission speed according to the receiving speed of the device
Fast
Slow
Under“Normal Mode”,the data of the code you scanned will be transferred
to your device via bluetooth,2.4G or USB.A short and low beep show the data
is transferred successfully.If not,the scanner will beep 3 times shortly and lowly.
Under“Normal Mode”,if scans failure,the data you just scanned will lost.
Under“Storage Mode”,the data of the code you just scanned will be stored
in the scanner.And scanner beep once shortly and slowly after each scanning.
Working Modes
Super Slow
Middle
Normal Mode
2.4G Wireless Barcode Scanner