User Manual

Operating Mode
Operating Mode
Bluetooth Pairing STEPS
A: Start the scanner and long press for 8 seconds
or scan the bluetooth pairing setup barcode to
enter the bluetooth search mode.
Note: When the scanner enters the state of matching
and it does not pair with bluetooth successfully within
1 minute, there is 2 times long low sound indicated
failing match and return to scanning mode.
(Or trigger twice to exit match mode and revert to scanning state)
Pair with operating system（Including Android、
ios、win system）that with Bluetooth function ：
In normal mode, the scans are uploaded directly to
computer via USB cable or WIFI dongle. If succeeds,
barcode scannner will make a low-frequency short tone.
If it fails, there willl be three low frequency short tones
to alarm. In normal mode, if fails, the data will be lost.
You can scan below:
By scan “Total amount of stored barcode” barcode, to
check the total amount of scanned barcodes in storage:
If the internal storage is full, the scanner will emit three
low-frequency short tones to alarm.
Upload the stored data by scanning the "Data Upload"
barcode. After data upload, it won’t delete the barcode
on the scanner automatically.So the user can scan the
“data upload” many time to upload the data.
Note: When uploading data, please ensure the
wireless signal is perfect, or upload after connecting
with USB cable
By scanning “Clear Data” to clear the scans in storage,
thecleared scans won't be uploaded once cleared.
Please confirm whether the scans have been uploaded
before clear them.
HID Pairing Setup Barcode
storage mode
Total amount of stored barcode
Data Upload
clear data
B: Turn on Bluetooth in the device to detect
bluetooth device named with "Barcode Scanner
HID".If pair successfully, you will hear a beep.
normal mode
If the transfer range is beyond Bluetooth wireless
transfer range storage mode is suggested, in which scans
are stored in internal storage after being scanned.
In storage mode, if a barcode is scanned and the
scanner will make a short tone and scans are automatically
stored in scanner's internal storage.
Capital and Lowcase Switch
Transfer to Lowcase Set
Transfer to Capital Set
Turn off Swith
Capital and Lowcase Switch
Plug usb and it cannot pair with dongle anymore
Add Time As Prefix or Suffix
A.Scanning setting code“Add Time as Prefix”,then
there is scanning time in front of barcode data.
B.Scanning setting code“Add Time as Suffix”，then
there is scanning time behind barcode data.
C.If you do not need scanning time as prefix or suffix,
you can scan following setting code“Cancel Setting”.
D.If the time is inaccurate, please go to
https://share.weiyun.com/508OXFZ download time
synchronization Tool Update_time_V1.1 to update.
Add Time as Prefix
Add Time as Suffix
Cancel Setting
Operating Mode
Back clamp type charging
treasure scanner
User Guide
Features
Performance Parameters
Working Conditions
Appearance description
Working Temperature：32°F to 104°F/0°C to 40°C
Storage Temperature：-40°F to 140°F/-40°C to 80°C
Humidity：5% to 95% relative humidity
(no condensation)
Ruggedness: Resist about many times drops from
1.5m to concrete ground
Ambient Light Immunity：Under normal office and
factory ambient lighting conditions, or exposed to
the sun won’t take any effect to it.
Electrostatic discharge: In line with 15KV air discharge
and 8KV contact discharge requirements
Wireless protocol：bluetooth
Memory: 16Mb
Processor: ARM Cortex 32bits
Bluetooth version: Bluetooth 4.1Module
Supported symbologies: 1D: Codabar,Code 11,
Code93,MSI,Code 128,UCC/EAN-128,Code 39,EAN-8,
EAN-13,UPC-A,ISBN,Industrial 25,Interleaved 25,
Standard 25,2/5 Matrix,
2D:QR,DataMatrix,PDF417,Aztec,Hanxin ,
Micro PDF417(option)
Indicator: Led、Buzzer、Vibrator(option)
Battery capacity：3000mA
Charging voltage/current: 5V/1A
Endurance：1D≤36H 2D≤24H（5seconds/scan）
Charge time：≤4hours
Standby: >30days
Free switching between wired and Bluetooth
dual modes
Large capacity storage, safe and reliable.
Stores barcodes more than 50000pcs off-line scanning.
Unique power management system, ultra-long
standby time.
Rich symbologies supported
Adopting imported trigger button, long lifespan,
fitting perfectly in your hand for comfortable use.
Support Android/IOS devices/Windwos
Support HID、SPP、BLE protocol
Mini size, fashion design,and portable
Ultra low power consumption and standby time
setup available
Bluetooth transmission distance: indoor
transmission distance up to 15 meters.
Can charge mobile phones & other devices
through OTG cable & transfer data
Power button/
scan button
Power button/
scan button
Scan window
USB interface
adjustable