433/Bluetooth Wireless Barcode Scanner User 's manual
BT 433Wireless Barcode Scanner Notices 1. Please read the user manual carefully before using this product. 2. The working voltage of this barcode scanner is 3.3V, charging voltage 5V. Please use our original USB cable to ensure the scanner work properly. 3. Copyright and Patent Right Our company has applied for patent rights, copyrights and software copyrights for this product and its accessories(including hardware, setting software, documentations,appearance,etc. ) 4.
BT 433 Wireless Barcode Scanner Contents 1.Notices..................................................................................................................1 2.Introduction&Features.........................................................................................3 3.Application&Parameters......................................................................................4 4.Working Environment&Related Regulations..................................................... 5 5.
BT 433 Wireless Barcode Scanner Introduction Our company's barcode scanner series are with strong scanning light source and enhanced long distance scanning technology, making it possible for long distance fast scanning capability for damage, dirty and poor quality printed barcodes under various ambient light conditions. It is durable in use, since it is protected by the industrial safty technique.High volume buzzer is another hint of success scanning besides LED light.
BT 433 Wireless Barcode Scanner Application * Applicable to Business (electrical, book, clothing, medicine, cosmetics, etc.), retail industry, postal service, telecommunications industry,warehousing, logistics industry, public security system, customs systems,banking system, medical system. * Compatible with Microsoft, Android, Linux and other operating systems.
BT 433 Wireless Barcode Scanner Working Environment Working Temperature： 32°F to 104°F/0°C to 40°C Storage Temperature： -40°F to 140°F/-40°C to 60°C Humidity： 5% to 95% relative humidity (no condensation) Ruggedness: Resist about 6 times drops from 1.5m to concrete ground Ambient Light Immunity： Under normal office and factory ambient lighting conditions, or exposed to the sun won’t take any effect to it.
BT 433 Wireless Barcode Scanner Outside Introduction LED Scan Window Scan Buttons Charging LED Charging Cradle
BT 433 Wireless Barcode Scanner Wireless Charging Cradle Charging LED Cradle Slot USB cable Built-in 433 Receiver
BT 433 Wireless Barcode Scanner Wireless Charging Cradle 45° 45°
BT 433 Wireless Barcode Scanner Connections Introductions A：When using 433 feature,you can match desktop PCs or PC terminals that do not support Bluetooth.Scanner supports systems such as XP, Win7, Win8, Win10,etc. (Please refer to page 13th for specific pairing steps) B：When using Bluetooth, you can match Android, IOS mobile phones, or PC terminals with bluetooth capabilities.
BT 433 Wireless Barcode Scanner Using scanner with base C:Charge the base: Connect base with PC via USB cable, the base will work as a charger.When turn off the scanner and put it on the base, the base can charge the scanner.
BT 433 Wireless Barcode Scanner Initialization Settings&Version Information If the scanner has problems by scanning some programming codes and can not be used any more, pls scan Initialization Settings. Initialization Settings Version Information BluetoothPairing Method A: Pressing the trigger for 8 seconds or scanning following se tting code to to enter bluetooth searching mode. 2 bluetooth LEDs flashing.
BT 433 Wireless Barcode Scanner Pull up/Hide keyboard(IOS system)&Caps Lock Switch Pull up/Hide IOS keyboard Double-Click to Pull up IOS keyboard Double-Click to Hide IOS keyboard Caps Lock Switch All Lowercase All Uppercase Do not convert case Case Interchange
BT 433 Wireless Barcode Scanner 433 Wireless Pairing Method: 1st:Scanning following setting code 2nd:Scanning following setting code,scanner bluetooth LED flashing 3rd: Connect wireless charging cradle with PC via USB cable. When you hear One beep ,that means connected! Notes：When the scanner is entered 433 pairing status and it does not get connected with your device within 1 minutes,it will beep twice lowly and longly.You need to repeat above-mentioned 3 steps to make it connect with you device.
BT 433 Wireless Barcode Scanner Sound/Vibration Setting Sound OFF Sound ON Vibration OFF(optional) Vibration ON(optional) Sleep Time Setting 1 min 5 min 10 min 30 min Never Sleep Sleep Immediately
BT 433 Wireless Barcode Scanner Ending Character Setting Add CR(Carriage Return) Add LF(Linefeed) Add CR+LF Cancel CR+LF Add TAB
BT 433 Wireless Barcode Scanner Keyboard Language Setting English(USA) German French Spanish Italian Janpanese International Universal Keyboard Belgian Portuguese English(UK) Portuguese(Brazil) French(Switzerland)
BT 433 Wireless Barcode Scanner Russian Czech French(Canada) Hungarian Polish Sweden / Finland Spanish(Mexico) Argentine(Latin America) Norwegian German(Swizerland)
BT 433 Wireless Barcode Scanner Transmission Speed Setting Choosing the transmission speed according to the receiving speed of the device Fast Middle Slow Super Slow Bluetooth Protocal Bluetooth HID Bluetooth SPP Bluetooth BLE Notes：Scanning any one of above 3 setting codes can make the scanner enter bluetooth pairing status.
BT 433 Wireless Barcode Scanner Working Modes Under“Normal Mode”,the data of the code you scanned will be transferred to your device via bluetooth,433 or USB.A short and low beep show the data is transferred successfully.If not,the scanner will beep 3 times shortly and lowly. Under“Normal Mode”,if scans failure,the data you just scanned will lost. Normal Mode Under“Storage Mode”,the data of the code you just scanned will be stored in the scanner.
BT 433 Wireless Barcode Scanner Scanning following setting code to upload the data you have scanned to your device via bluetooth,433 wireless or USB. Notes：Making sure that scanner is got connected with your device. After uploading data,the data which have been stored in the scanner will not be deleted from the scanner Upload Data Scanning following setting code to clear all the data which is stored in the scanner.
BT 433 Wireless Barcode Scanner Change Bluetooth Name 1st：Scanning following setting code”Change BT Name” Change BT Name 2nd：Scanning a customized codes which its data is the name you want. You can generate a customized code via barcode generator,like label shop. Or you also can contact with us to generate a code for you. For example：Folowing barcode’s data is “Scanner123”,after you scanned it,the bluetooth name of your scanner will be changed to “Scanner123”.
BT 433 Wireless Barcode Scanner Hide Pre-characters/Post-characters 1st：Scanning following setting code“Hide Pre-characters”or“Hide Post-characters” Hide Pre-characters Hide Post-characters 2nd：Choosing how many characters you need to hide.
BT 433 Wireless Barcode Scanner 9 10 11 12 13 14 15 16 Notes：If you need to cancel hiding characters setting,you can scan following setting code Cancel Hiding Pre-characters Cancel Hiding Post-characters
BT 433 Wireless Barcode Scanner Add Time As Prefix or Suffix A.Scanning setting code“Add Time as Prefix”,then there is scanning time in front of barcode data. Add Time as Prefix B.Scanning setting code“Add Time as Suffix”，then there is scanning time behind barcode data. Add Time as Suffix C.If you do not need scanning time as prefix or suffix,you can scan following setting code“Cancel Setting”.
BT 433 Wireless Barcode Scanner Update Time 1st: Please download at 'https://share.weiyun.com/508OXFZ'. (scan the QR code below) 2rd: Download the file after entering the website (Time updating website offline version), open (Scanner QR and BarCode Time Adjust.html). 3rd: Use the scanner to scan the "time setting code" to update the time.
BT 433 Wireless Barcode Scanner Prefix/Suffix Setting The setting prefix and suffix is divided into two parts,displayable characters and controlled characters 1st Part：Displayable characters Step1：Scanning following setting code“Add Prefix”or“Add Suffix” Add Prefix Add Suffix Step2 ：Finding the character which you need to add as prefix or suffix in appendix B,and scanning the barcode corresponding to the character.
BT 433 Wireless Barcode Scanner Character Set 2 Character Set 3 Character Set 4 Step2：Scanning following setting code“Add Prefix”or“Add Suffix” Add Prefix Add Suffix Step3：Finding the character which you need to add as prefix or suffix in appendix A,and scanning the barcode corresponding to the character.
BT 433 Wireless Barcode Scanner 433 Wireless COM-Port Mode Setting Step1：Scanning setting code“COM-Port Mode” COM-Port Mode Step2：Scanning setting code“Enter Pairing Mode” Enter Pairing Mode Step3：Please insert the data cable connected to the base into the USB port of the computer (NOTE: it is recommended to connect to the USB port on the computer motherboard to avoid insufficient power supply issue). After the connection is successful, the scanner will emit a beep and the pairing is successful.
BT 433 Wireless Barcode Scanner AppendixA:Controlled Characters Decimal ASCII Character Set 0 Character Set 1 Character Set 2 Character Set 3 Character Set 4 1 SOH NULL Home Ctrl+A Alt+001 CR 2 STX Ctrl+B End Ctrl+B Alt+002 Cap Lock 3 ETX Ctrl+C Up Arrow Ctrl+C Alt+003 Right Arrow 4 EOT NULL Down Arrow Ctrl+D Alt+004 Up Arrow 5 ENQ NULL Left Arrow Ctrl+E Alt+005 NULL 6 ACK NULL Right Arrow Ctrl+F Alt+006 NULL 7 BEL NULL Shift+Tab Ctrl+G Alt+007 Enter 8
BT 433 Wireless Barcode Scanner Decimal ASCII Character Set 0 Character Set 1 Character Set 2 Character Set 3 Character Set 4 14 S0 F1 Page Up Ctrl+N Alt+014 Insert 15 S1 F2 Page Down Ctrl+O Alt+015 Esc 16 DLE F3 F11 Ctrl+P Alt+016 F11 17 DC1 F4 NULL Ctrl+Q Alt+017 Home 18 DC2 F5 NULL Ctrl+R Alt+018 Print Screen 19 DC3 F6 NULL Ctrl+S Alt+019 Back Space 20 DC4 F7 NULL Ctrl+T Alt+020 Shift tab 21 NAK F8 F12 Ctrl+U Alt+021 F12 22 SYN F9 F1 Ctrl+V
BT 433 Wireless Barcode Scanner Decimal ASCII Character Set 0 Character Set 1 Character Set 2 Character Set 3 Character Set 4 28 FS ALT+028 F7 Ctrl+\ Alt+028 F7 29 GS ALT+029 F8 Ctrl+] Alt+029 F8 30 RS NULL F9 Ctrl+^ Alt+030 F9 31 US NULL F10 Ctrl+_ Alt+031 F10 Setting Code
BT 433 Wireless Barcode Scanner AppendixB:Displayable Characters Decimal ASCII 32 Setting Code Decimal ASCII 空格 45 - 33 ! 46 .
BT 433 Wireless Barcode Scanner Decimal ASCII 58 Setting Code Decimal ASCII : 72 H 59 ; 73 I 60 < 74 J 61 = 75 K 62 > 76 L 63 ? 77 M 64 @ 78 N 65 A 79 O 66 B 80 P 67 C 81 Q 68 D 82 R 69 E 83 S 70 F 84 T 71 G 85 U Setting Code
BT 433 Wireless Barcode Scanner Decimal ASCII 86 Setting Code Decimal ASCII V 100 d 87 W 101 e 88 X 102 f 89 Y 103 g 90 Z 104 h 91 [ 105 i 92 \ 106 j 93 ] 107 k 94 ^ 108 l 95 _ 109 m 96 ` 110 n 97 a 111 o 98 b 112 p 99 c 113 q Setting Code
BT 433 Wireless Barcode Scanner Decimal ASCII Setting Code Decimal 114 r 199 115 s 231 116 t 117 u 118 v 119 w 120 x 121 y 122 z 123 { 124 | 125 } 126 ~ 127 DEL ASCII Setting Code
BT 433 Wireless Barcode Scanner FAQ（Frequently Asked Questions） What should I do if the scanner can not pair with my bluetooth device? A.Making sure the scanner is in the pairing state under the required Bluetooth protocol B.If the devices has connected successfully with other barcode scanner via bluetooth,or other devices.Please delete the bluetooth connection record before connecting C.The wireless module has been damaged Why can not the scanner read some codes? A.
Buzzer description BT 433 Wireless Barcode Scanner Buzzcr Proformancc Introduction one/long beep low to high frequency power on one/long beep high to low frequency power off one/short beep low frequency read a code under normal mode one/short beep low to high frequency read a code under storage mode one/short beep high to high frequency read a setting mode three/short beeps low frequency transfer failure or storage space is full LED Light Introduction LED Light Proformance Introduction two
Battery Display
