User Guide

A: Long press the trigger for 8 seconds or scan the HID Pairing Setting Code
to make the scanner entering Bluetooth pairing state, then the two blue lights
flash alternately left and right.
B: Turn on Bluetooth searching in the user's device, find Bluetooth scanner
‘Barcode scanner HID’ and click on to start the pairing state. After a
beep prompt sound, the scanner is paired successfully, and the blue light
on the right is always on.
BluetoothPairing Method
Notes：When the scanner is entered bluetooth pairing status and it does
not get connected with your device within 1minutes,it will beep twice lowly
and longly.You need to repeat above-mentioned 3 steps to make it connect
with you device.(When the scanner is in the bluetooth pairing status,
double-click can make it exit the pairing mode).
Initialization Settings&Version Information
B：If you have after-sales problems and need to contact our customer
service staff, please provide version information by scanning setting
code“Version Information”
A：You can scan the setting code“Initialization Settings”to make
the scanner back to factory default settings
Bluetooth Pairing Setup Code
Initialization Settings
Version Information
BT 2.4G Wireless Barcode Scanner