Spec Sheet

All-in-One Integrated Wired and Wireless Networking
The need to purchase and manage additional network
equipment is eliminated with the elegant all-in-one design
of the WS 2000. Support for multiple wireless LAN protocols
(Wi-Fi
®
IEEE 802.11b, 802.11a, 802.11g), as well as integrated
Ethernet switching (6 LAN ports), routing (RIP, Static Routes),
Gateway and Power-over-Ethernet (PoE) simplifies network
deployment and management, and reduces capital expense.
Functionality includes an integrated Stateful Packet Inspection
Firewall, Network Address Translation (NAT), DHCP server
(on multiple subnets), and WAN connectivity support for
flexible low cost installation.
Second-Generation Wireless LAN: the Power of
Centralized Intelligence
The WS 2000 offers the power and cost-efficiencies of
second-generation wireless networking. Intelligence previously
distributed and duplicated throughout first-generation access
point-based wireless LANs is centralized and aggregated in the
WS 2000 Wireless Switch, delivering unprecedented power and
control, and reduced deployment and management costs. Instead
of traditional access points, the WS 2000 works in conjunction
with low-cost Access Ports, which are essentially ‘zero configuration’
devices, operational right out of the box, and can be mounted
almost anywhere—even inside ceiling tiles.
The WS 2000 Wireless Switch from Symbol Technologies is an
integrated wired and wireless networking solution, priced and
designed to meet the needs of healthcare clinics, schools and
colleges to warehouses, branch offices of government agencies,
retail stores, manufacturing plants and more. Built on the same
centralized packet switching architecture as Symbol’s award-winning
WS 5000 Wireless Switch, the WS 2000 offers enterprise class
security (802.11i, site-to-site IPSec VPN), public/private network
segmentation and 802.11abg standards support and provides:
䊳
Extensive wireless LAN functionality and high performance
䊳
Power and simplicity of centralized remote management
䊳
Ability to scale to support future growth
…Investment protection and network simplicity.
Integrated Wired and Wireless Networking for
Branch Office and Small/Medium Enterprises
2 11
Store
Systems
Server
Mobile Computers
Wireless Printers, Scales
WAN
WPOS
802.11abg
DSL / Cable Modem
Integrated Stateful
Inspection Firewall
802.11b
Integrated PoE
(Ethernet w/power)
WAN Uplink
Storage for
Mobile Apps
WLAN 1
WLAN 3
WLAN 2
Integrated Wired-Wireless Networking:
WS 2000 in a Retail Wireless Store
WS 2000 Specification Highlights
Packet Forwarding
802.1D-1999 Ethernet Bridging
802.11-.802.3 Bridging
Wireless Networking
Wireless LAN: Supports 4 WLANs
Virtual AP: Multi-ESS/BSSID traffic segmentation
(Virtual AP support)
Pre-emptive Roaming
Load Balancing
Proxy ARP
Access Port Radios: Supports 1-6 Access Ports
Automatic Access Port Adoption with ACLs
Access Port Load Balancing
Radio & Frequency Management: Automatic Channel Select (ACS)
Transmit Power Control (TPC)
Country Code based RF Configuration
802.11b – 3 Non-overlapping channels
802.11a – 11 Non-overlapping channels
802.11g - 3 Non-overlapping channels
Network Security
Packet Filtering: L2/3/4 Stateful Packet Analysis
Network Address Translation (NAT)
Authentication Mechanisms: Access Control Lists (ACLS)
Pre-Shared Keys (PSK)
802.1x/EAP
Transport Layer Security (TLS)
Tunneled Transport Layer Security (TTLS)
Protected EAP (PEAP)
Kerberos
Transport Encryption: WEP 40/128 (RC4), KeyGuard, WPA—TKIP,
AES-CCMP
Key Exchange and Management: Extensible Authentication Protocol (EAP)
Kerberos
Optimized Wireless QoS
Voice Prioritization
Power Save Protocol (PSP) integration
Management
Command Line Interface (Serial, Telnet)
Java Applet (HTTP, Secure HTTP)
Syslog
Text-Based Configuration Files
Remote configuration and firmware update (via TFTP, FTP)
SNMP v1/v2/v3
MIBs: MIB-II, Ping MIB, TraceRoute MIB, Symbol MIB
Physical Characteristics
Form Factor: Standard 1RU
Dimensions: 1.75 in. H x 11.25 in. W x 8 in. D
44.5 mm H x 286 mm W x 203 mm D
Weight: 1.41 lb/0.64 kg
Physical Interfaces: 1 - RS232 serial console port
7 - 10/100 Ethernet ports (including 1 WAN uplink port),
4 Ports support 802.3af Power-over-Ethernet (PoE)
MTBF: > 50,000 Hours
Power Requirements
AC Input Voltage: 100-250 VAC
Max AC Input Current: 3A@230 VAC
Max Power Consumption: 120 W
Input Frequency: 47 Hz to 63 Hz
User Environment
Operating Temperature: 32°F to 104°F/0°C to 40°C
Storage Temperature: -40°F to 158°F/-40°C to 70°C
Operating Humidity: 5% - 95% (without condensation)
Storage Humidity: 5% - 95% (without condensation)
Operating Altitude: 50 ft. to 8,000 ft./16 m to 2,438 m
Storage Altitude: 50 ft. to 12,000 ft./16 m to 3,658 m
Regulatory
Safety Certifications: FCC (Art.15, part B), Industry Canada, CE, VCCI, C-Tick,
BSMI
EMI Compliance: UL 1950, cUL (Canada), VDE GS, DENAN (Japan),
CB Cert
Part Numbers
WS-2000-SME-WW
WS-2000-IC-ABG-WW (WS 2000 and 1 AP 300 Solution)
WS-2000-IC-WW (WS 2000 and 1 AP 100 Solution)