P370 / 470 RF Scanner Quick Reference Guide
P370 / 470 RF Scanner © 1997 - 2006 SYMBOL TECHNOLOGIES, INC. All rights reserved. Symbol reserves the right to make changes to any product to improve reliability, function, or design. Symbol does not assume any product liability arising out of, or in connection with, the application or use of any product, circuit, or application described herein.
Quick Reference Guide 3 Introduction The P470/370 cordless RF scanners bring new flexibility and economy to data capture and data management in both industrial and retail operations. The scanner communicates with your host computer through radio transmission instead of through a cable. With the RF scanner, you are free to scan and transmit without a physical cable, from as far away as 100 feet (30.5 meters) even without a direct line of sight.
P370 / 470 RF Scanner Scanning Consult the P470/P370 RF Scanners Product Reference Guide (p/n 72-38495-xx) for programming instructions. If you need assistance, contact your local supplier or the Symbol Support Center. To scan: 1. Ensure the battery is charged. 2. Ensure the bar code is in the correct scanning range. 3. Aim and press the trigger. When the scanner has read the symbol: - a beep sounds. - the LED above the display turns green. - the red laser turns off.
Quick Reference Guide 5 Scan the Entire Symbol - The scan beam must cross every bar and space on the symbol (as in the left bar code below). Hold the scanner farther away for larger symbols. Hold the scanner closer for symbols with bars that are close together. Changing the Battery When a battery is fully charged, it generally lasts up to 10 hours without being returned to the cradle. By returning it to the cradle during the day, this time is extended.
P370 / 470 RF Scanner Quick Startup Instructions The table that follows includes an index of startup instructions to help get you started quickly. The index is listed in a step-by-step order beginning with step 1, Setting up the System. This index references pages in the P470/P370 RF Scanners Product Reference Guide (p/n 72-38495-xx). The Product Reference Guide is included on the CD shipped with the scanner. It is also available on the Symbol Web site at: http://www.symbol.com/manuals.
Quick Reference Guide 7 Test Symbols Code 128 EAN-8 13 Mil UPC Code 39
P370 / 470 RF Scanner Regulatory Information All Symbol devices are designed to be compliant with rules and regulations in locations they are sold and are labeled as required. Any changes or modifications to Symbol Technologies equipment, not expressly approved by Symbol Technologies, could void the user's authority to operate the equipment. CAUTION Only use Symbol approved and UL Listed accessories, battery packs and battery chargers.
Quick Reference Guide 9 Warnings for Use of Wireless Devices Please observe all warning notices with regard to the usage of wireless devices. Potentially Hazardous Atmospheres You are reminded of the need to observe restrictions on the use of radio devices in fuel depots, chemical plants etc. and areas where the air contains chemicals or particles (such as grain, dust, or metal powders) and any other area where you would normally be advised to turn off your vehicle engine.
P370 / 470 RF Scanner FCC / EU RF Exposure Guidelines Safety Information The device complies with Internationally recognized standards covering Specific Absorption Rate (SAR) related to human exposure to electromagnetic fields from radio devices. Reducing RF Exposure - Use Properly It is advisable to use the device only in the normal operating position.
Quick Reference Guide 11 In accordance with Clause 5, IEC 825 and EN60825, the following information is provided to the user: ENGLISH CLASS 1 CLASS 2 HEBREW CLASS 1 LASER PRODUCT LASER LIGHT DO NOT STARE INTO BEAM CLASS 2 LASER PRODUCT DANISH / DANSK KLASSE 1 KLASSE 1 LASERPRODUKT KLASSE 2 LASERLYF SE IKKE IND I STRÅLEN KLASSE 2 LASERPRODUKT ITALIAN / ITALIANO CLASSE 1 PRODOTTO AL LASER DI CLASSE 1 CLASSE 2 LUCE LASER NON FISSARE IL RAGGIOPRODOTTO AL LASER DI CLASSE 2 DUTCH / NEDERLANDS KLASSE 1 KLAS
P370 / 470 RF Scanner recycling marks on the batteries used in sales, giveaway or promotion. Contact a qualified Taiwanese recycler for proper battery disposal. Symbol Rechargeable Batteries Symbol rechargeable battery packs are designed and constructed to the highest standards within the industry. However, there are limitations to how long a battery can operate or be stored before needing replacement.
Quick Reference Guide 13 Radio Transmitters This device complies with RSS 210 of Industry & Science Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. Label Marking: The Term "IC:" before the radio certification only signifies that Industry Canada technical specifications were met. Marking and European Economic Area (EEA) 2.
P370 / 470 RF Scanner Deutsch: Für Kunden innerhalb der EU: Alle Produkte müssen am Ende ihrer Lebensdauer zum Recycling an Symbol zurückgesandt werden. Informationen zur Rücksendung von Produkten finden Sie unter http://www.symbol.com/environmental_compliance. Eesti: EL klientidele: kõik tooted tuleb nende eluea lõppedes tagastada taaskasutamise eesmärgil Symbol'ile. Lisainformatsiooni saamiseks toote tagastamise kohta külastage palun aadressi: http://www.symbol.com/environmental_compliance.
Quick Reference Guide 15 Slovenski: Za kupce v EU: vsi izdelki se morajo po poteku življenjske dobe vrniti podjetju Symbol za reciklažo. Za informacije o vraèilu izdelka obišèite: http://www.symbol.com/environmental_compliance. Suomi: Asiakkaat Euroopan unionin alueella: Kaikki tuotteet on palautettava kierrätettäväksi Symbol-yhtiöön, kun tuotetta ei enää käytetä. Lisätietoja tuotteen palauttamisesta on osoitteessa http://www.symbol.com/environmental_compliance.
Service Information Before you use the unit, it must be configured to operate in your facility’s network and run your applications. If you have a problem running your unit or using your equipment, contact your facility’s Technical or Systems Support.
