User Manual
Table Of Contents
- Introduction
- Parts of the WSS 1000 System
- Scanners for the WSS 1000 System
- Installing and Charging the Battery
- Assembling the WSS 1000 System
- Power
- Communicating with the Host
- Data Entry
- Removing the WWC 1000 from the Mount
- Cleaning
- Introduction
- Composants du système WSS 1000
- Lecteurs compatibles avec le WSS 100
- Mise en place et charge de la batterie
- Montage du système WSS 1000
- Alimentation
- Communication avec l’ordinateur central
- Saisie des données
- Retrait du WWC 1000 du dispositif de fixation
- Nettoyage
- Einführung
- Teile des WSS 1000-Systems
- Scanner für das WSS 1000-System
- Einsetzen und Laden des Akkus
- Montage des WSS 1000 Systems
- Strom
- Kommunikation mit dem Host
- Dateneingabe
- Herausnehmen des WWC 1000 aus der Montagevorrichtung
- Reinigung
- Introduzione
- Componenti del sistema WSS 1000
- Scanner compatibili con il WSS 1000
- Installazione e caricamento della batteria
- Assemblaggio del sistema WSS 1000
- Alimentazione
- Comunicazione con l’host
- Immissione dati
- Rimozione del WWC 1000 dal supporto
- Pulizia
- Introducción
- Partes del sistema WSS 1000
- Scanners para el sistema WSS 1000
- Instalación y carga de la batería
- Ensamblaje del sistema WSS 1000
- Alimentación
- Comunicación con el ordenador central
- Registro de datos
- Extracción del WWC 1000 del montaje
- Limpieza
- Ergonomic Recommendations
- Laser Devices
- FCC RF Exposure Guidelines
- Radio Frequency Interference Requirnments
- Radio Frequency Interference Requirements - Canada
- Marking and European Economic Area (EEA)
- Statement of Compliance
- Other Countries
- Informations réglementaires
- Recommandations ergonomiques
- Appareils lasers
- Consignes d'exposition à des RF (FCC)
- Obligations en ce qui concerne les parasites en radiofréquence
- Obligations en matière d'interférence en radiofréquence - Canada
- Marquage et zone économique européenne (ZEE)
- Regulatorische Informationen
- Ergonomische Empfehlungen
- Lasergeräte
- FCC-Richtlinien für hochfrequente Geräte
- Forderungen für Hochfrequenzstörungen
- Radio Frequency Interference Requirements - Canada
- Zeichen und der europäische Wirtschaftsraum (EWR)
- Informazioni normative
- Raccomandazioni ergonomiche
- Dispositivi laser
- Direttive FCC in materia di esposizione alle radiofrequenze
- Requisiti in materia di interferenze in radiofrequenza
- Radio Frequency Interference Requirements - Canada
- Marcatura nell'Area Economica Europea (AEE)
- Información sobre normativas
- Recomendaciones ergonómicas
- Dispositivos láser
- Pautas de exposición a RF de la FCC
- Requisitos de interferencias de las radiofrecuencias
- Radio Frequency Interference Requirements - Canada
- La marca y el Área Económica Europea (AEE)
- Service Information
Guide utilisateur
13
documentation for your application for more in-
formation.
• Cursor position is controlled by the Up Arrow,
Down Arrow, Left Arrow, and Right Arrow keys.
Removing the WWC 1000 from the
Mount
The WWC 1000 can be removed from the wrist mount
for use by other operators.
To remove the WWC 1000:
1. Detach the cable connection to the scanner.
2. Unsnap the bar securing the wrist computer.
3. Lift the WWC 1000 out of the mount.
Cleaning
Wrist Computer
To clean the wrist computer, use a clean, soft cloth
dampened with a mild cleaner such as soap and water.
Do not use abrasive paper, cloth, or abrasive/corrosive
cleaners. Clean the keypad and scanner triggers, and
wipe the display window with lens tissue.
Wrist Mount
Remove the bar from the wrist mount. Hand wash the
fabric mount with warm water using a mild detergent
and air dry (see tag on mount for washing instructions).