User Manual
Table Of Contents
- Introduction
- Parts of the WSS 1000 System
- Installing and Charging the Battery
- Assembling the WSS 1000 System
- Power
- Communicating with the Host
- Data Entry
- Removing the WWC 1000 from the Mount
- Cleaning
- Introduction
- Composants du système WSS 1000
- Mise en place et charge de la batterie
- Montage du système WSS 1000
- Alimentation
- Communication avec l’ordinateur central
- Saisie des données
- Retrait du WWC 1000 du dispositif de fixation
- Nettoyage
- Einführung
- Teile des WSS 1000-Systems
- Einsetzen und Laden des Akkus
- Montage des WSS 1000 Systems
- Strom
- Kommunikation mit dem Host
- Dateneingabe
- Herausnehmen des WWC 1000 aus der Montagevorrichtung
- Reinigung
- Introduzione
- Componenti del sistema WSS 1000
- Installazione e caricamento della batteria
- Assemblaggio del sistema WSS 1000
- Alimentazione
- Comunicazione con l’host
- Immissione dati
- Rimozione del WWC 1000 dal supporto
- Pulizia
- Introducción
- Partes del sistema WSS 1000
- Instalación y carga de la batería
- Ensamblaje del sistema WSS 1000
- Alimentación
- Comunicación con el ordenador central
- Registro de datos
- Extracción del WWC 1000 del montaje
- Limpieza
- Ergonomic Recommendations
- Regulatory Information
- Patent Information
4
WSS 1000 System
Charging the Battery in WWC 1000
To charge the Lithium-Ion battery in the WWC 1000:
1. Place the WWC 1000 in the cradle as shown be-
low:
2. The cradle’s CHARGING light illuminates (RED)
if the WWC 1000 is properly seated and the bat-
tery is charging.
3. The battery requires approximately 2 hours to
charge fully. The CHARGING light changes to
GREEN when the battery is fully charged.
4. To remove the WWC 1000 from the cradle, tilt the
WWC 1000 upward and pull out.
For more information on the CS 1000 Cradle, re-
fer to the
CS 1000 Single-Slot Cradle QRG
, p/n
70-16237-xx, or the
CS 1000 4-Slot Cradle QRG
,
p/n 70-17661-xx.