User Manual
Table Of Contents
- Introduction
- Parts of the WSS 1000 System
- Installing and Charging the Battery
- Assembling the WSS 1000 System
- Power
- Communicating with the Host
- Data Entry
- Removing the WWC 1000 from the Mount
- Cleaning
- Introduction
- Composants du système WSS 1000
- Mise en place et charge de la batterie
- Montage du système WSS 1000
- Alimentation
- Communication avec l’ordinateur central
- Saisie des données
- Retrait du WWC 1000 du dispositif de fixation
- Nettoyage
- Einführung
- Teile des WSS 1000-Systems
- Einsetzen und Laden des Akkus
- Montage des WSS 1000 Systems
- Strom
- Kommunikation mit dem Host
- Dateneingabe
- Herausnehmen des WWC 1000 aus der Montagevorrichtung
- Reinigung
- Introduzione
- Componenti del sistema WSS 1000
- Installazione e caricamento della batteria
- Assemblaggio del sistema WSS 1000
- Alimentazione
- Comunicazione con l’host
- Immissione dati
- Rimozione del WWC 1000 dal supporto
- Pulizia
- Introducción
- Partes del sistema WSS 1000
- Instalación y carga de la batería
- Ensamblaje del sistema WSS 1000
- Alimentación
- Comunicación con el ordenador central
- Registro de datos
- Extracción del WWC 1000 del montaje
- Limpieza
- Ergonomic Recommendations
- Regulatory Information
- Patent Information
10
WSS 1000 System
Communicating with the Host
Using the Cradle
The CS 1000 cradle is used to perform communications
with a host PC. To set up the cradle for operation:
1. Plug one end of a null modem cable (p/n 59846-
03-00) into the communications port located on
the left end of the cradle.
2. Connect the other end of the cable to the host com-
puter’s serial (COMM) port.
3. Provide power to the cradle by plugging the power
supply’s round connector into the power port on
the cradle and the other end of the power cable in
an
electrical outlet.
4. Insert the WWC 1000 in the cradle (the ring scan-
ner can be attached).
5. Start the communications program as detailed in
the
WSS 1000 Product Reference Guide
.
Radio Communications
Wireless communication with the host is available
through the Spectrum One
or Spectrum24
radio
network. For information on performing radio
communications, refer to the
WSS 1000 Product
Reference Guide
.