User's Manual
7
FINAL.Not for distribution.
2. Using the arrows on the edge of the case as guides, move the
edge to the midline of the mounting area and mark points on the
midline for the screws.
3. At each point, screw in the self-tapping screws and stop where the
threads meet the shank or shoulder of the screw.
4. If required, install and attach a security cable to the unit’s lock port.
5. Place the large corner of each of the case’s mount slots over the
screw heads.
6. Slide the case down along the mounting surface to hang the
mount slots on the screw heads.
7. Attach the Ethernet cable.
8. Verify the unit has power by observing that the LEDs are lit or
flashing.
RJ-45
RJ-45
Lock Port