User's Manual

6
AP 300 Quick Reference Guide FINAL.Not for distribution.
Wall Mounting
In this procedure, hang the AP 300 Access Port along its width or length
using the slots on the bottom of the unit. The following illustration shows
a lengthwise mount.
Hardware
• A CAT-5 cable connected to a compatible Symbol wireless
switch—for example, the WS 2000 or WS 5000—with sufficient
slack and without a molded or integrated strain relief on the
connector to the AP 300
• Two wide-shoulder Phillips pan head self-tapping screws
(provided)
• Case: In the procedure, use the arrows on the AP 300’s case as
a guide to determine the proper placement for the unit’s mounting
screws.
• Safety cable (recommended)
• Security cable (optional)
Procedure
1. Orient the case on the wall by its width or length.
Mount
Slots