Reference Guide
Table Of Contents
- About This Manual
- Chapter 1 Getting Started
- Chapter 2 Installing Hardware
- Chapter 3 Configuring Spectrum24
- Chapter 4 Installing Software
- Chapter 5 Operating a VRC 6940
- Chapter 6 Troubleshooting
- Chapter 7 Maintenance
- Appendix A Utilities and Diagnostic Tests
- Appendix B Software Environment
- Appendix C Keyboard Layouts
- Appendix D Environmental and Technical Specifications
- Appendix E Communications Status Codes
- Glossary
3-5
Configuring Spectrum24
4. When you finish setting Spectrum24 parameters, warm boot the terminal:
a. Press the ON/OFF key to suspend the terminal.
b. Press and hold the SHIFT and L keys.
c. Press and release the ON/OFF button.
d. Release the SHIFT and L keys.
" The terminal reloads the system drivers and attempts to associate with a
Spectrum24 AP.
" If the radio card is configured correctly, it tries to locate a bootp server, fails, and
boots to a DOS prompt. This means the radio card is working correctly. Proceed
to step 5.
" If the radio card is not configured correctly, the CFG24 Configurator utility
reappears. Recheck your configuration parameters and perform another warm
boot.
5. Turn the VRC 6940 off.
You have successfully configured the Spectrum24 radio card. You may now
download and install application programs. See Transferring and Installing
Application Programs on page 4-2.