Quick Reference Guide

10
VRC 6940 Terminal
To install VRC 6940 hardware:
1. Prepare a mounting location:
a. Select a location to mount the terminal. The terminal’s at-
tached bracket has holes cut for bolts. Use these holes to
mark bolt hole locations.
b. Prepare the mounting surface to accept two 3/8” bolts.
Drill two holes with a 7/16” drill bit.
2. Install the terminal onto the mounting surface:
a. Position the terminal on the mounting surface.
b. Fasten it using a minimum of two 3/8” self-locking nuts.
Installation Note: Selecting a Mounting Location
The bracket and terminal must be:
• firmly secured to a surface that can support the weight of the
terminal — on a vehicle, wall or workbench
• secured with a minimum of two 3/8” diameter bolts and ny-
lon self-locking nuts
• easy for the end-user to see and reach