Quick Reference Guide

9
Quick Reference
Equipment Required
Vehicle Mounting
• VRC 6940 terminal.
• an External DC power cable (supplied with terminal).
• minimum of two 3/8” bolts with self-locking nylon nuts.
• a drill with a 7/16” drill bit.
• 7/16” hex wrench.
• a connector for terminating the External DC power cable. Se-
lect one that mates with your vehicle’s power supply.
• primary or external antenna (optional).
Wall or Workbench Mounting
• VRC 6940 terminal.
• AC universal power supply (Symbol p/n 50-14001-006).
• AC line cable (Symbol p/n 23844-00-00).
• DC power cable (Symbol p/n 25-39385-01).
• minimum of two 3/8” bolts with self-locking nylon nuts.
• a drill with a 7/16” drill bit.
• 7/16” hex wrench.
• primary or external antenna (optional).
Hardware Installation
The physical requirements of the work area affect where you place
the terminal. There are different installation options, depending on
where you plan to locate it. Illustrations on page 12 and 13 show
a terminal mounted on a vehicle, a terminal mounted on a wall,
and a terminal mounted on a workbench.
Caution: Do not install a VRC 6940 terminal in a location that will
affect vehicle safety or driveability.