Vehicular Radio Computer Product Reference Guide

A-6

VRC 6940 Product Reference Guide

Note: DIAG24 uses a message file (msg.msg) that it reads from the same

drive and directory as the DIAG24 software. If you see corrupted

screens, the message file may be missing.

4. Select a Roaming Mode. If you want the terminal to ping an AP, but roam between

APs as you move around, select Roaming Enabled. If you want to ping a specific

AP, select that AP identifier from the list. If more APs are in range than can fit on one

screen, then the last selection will be More. Selecting this will present more available

APs for selection.

Figure A-4 shows a Roaming Enabled option, followed by a list of AP identifiers. For

each AP identifier, bb represents the AP identifier (or BSS identifier) and

eeeeeeeeeeee represents the 48-bit MAC address of the AP in hexadecimal

notation.

Figure A-4. Selecting a Roaming Mode

5. Press 1, 2 or 3 to select the ping message size:

Figure A-5. Selecting Ping Message Size

1. Roaming Enabled

2. bb--eeeeeeeeeeee

3. bb--eeeeeeeeeeee

4. bb--eeeeeeeeeeee

....

n. bb--eeeeeeeeeeee

Select[1-n or 'Q']:

MESSAGE SIZE

1. 100 bytes

2. 256 bytes

3. 512 bytes

Select[1-3 or 'Q']: