User's Manual
Table Of Contents
- Introduction
- About This Guide
- Parts of the SPT 1800
- Parts of the SPT 1800 (continued)
- Parts of the SPT 1800 (continued)
- Getting Started
- Installing the SIM Card (SPT 1834 Only)
- Installing the Battery
- Starting the SPT 1800
- Using the SPT 1800
- Resetting the SPT 1800
- Attaching the Handstrap
- Scanning 1-D Bar Codes
- Scanning PDF417 (2-D) Bar Codes
- Initiating a Network Connection
- Maintaining the SPT 1800
- Troubleshooting
- Ergonomic Recommendations
- Regulatory Information
- Battery Caution
16
SPT 1800 Series
connection. A cursor does not appear if you are not connected to
the radio.
Maintaining the SPT 1800
For trouble-free service, observe the following tips when using
your SPT 1800:
• Do not scratch the screen. Use the supplied stylus or a plas-
tic-tipped pen intended for use with a touch-sensitive screen.
Never use a pen or pencil or other sharp object on the
screen.
• Although your SPT 1800 is water and dust resistant, do not
expose it to rain or moisture for an extended period. Treat
your SPT 1800 as you would a pocket calculator or other
small electronic instrument.
• The touch-sensitive screen of your SPT 1800 contains glass.
Do not subject your SPT 1800 to any strong impact.
• Protect your SPT 1800 from temperature extremes. Do not
leave it on the dashboard of a car on a hot day, and keep it
away from heaters and other heat sources.
• Do not store or use your SPT 1800 in any location that is ex-
tremely dusty, damp or wet.
• If the surface of the SPT 1800 screen becomes soiled, clean
it with a soft lens cloth moistened with a diluted window-
cleaning solution.