User's Manual

18
SPT 1800 Series
SPT 1800 doesn’t
recognize my hand-
writing.
You are not using
Graffiti character
strokes.
For your SPT 1800 to recognize hand-
writing input with the stylus, you need
to use the Graffiti
®
character strokes.
See the
SPT 1800 Product Reference
Guide
for information about how to
write Graffiti character strokes.
You are not writ-
ing character
strokes in the
correct area.
Make the Graffiti character strokes in
the Graffiti writing area — not on the
display part of the screen.
Make sure you are writing the strokes
for letters in the left-hand side, and the
strokes for numbers in the right-hand
side of the Graffiti writing area.
Graffiti is shifted
into extended or
punctuation
modes.
See the
SPT 1800 Product Reference
Guide
for information about shifting
into and out of punctuation modes.
Tapping the screen
buttons or icons
does not activate the
corresponding fea-
ture.
Screen is out of
calibration.
Recalibrate the digitizer. Choose Digi-
tizer from the Preferences application
pick list and follow the directions on the
screen.
When I tap the Menu
icon, nothing hap-
pens.
Application does
not have menu
item.
Not all applications or screens have
menus. Try changing to a different ap-
plication.
Beamed data does
not transmit.
Terminals are too
far apart or ob-
structed. File is
locked.
Confirm that the SPT 1800 terminals
are 5” apart, the receiver has its IrDA
capability enabled, and that the path
between the two devices is clear of ob-
stacles.
Note: You cannot overwrite a .prc file
via IrDA if it is locked.
When receiving
beamed data an out
of memory message
appears.
Memory full. Your SPT 1800 terminal requires at
least twice the amount of memory
available as the data you are receiving.
For example, if you are receiving a 30K
application, you must have at least
60K free.
Problem Cause Solution