User Manual

18
SPT 1700 Series
• Make the Graffiti character strokes in the Graffiti writing area
— not on the display part of the screen.
• Make sure you are writing the strokes for letters in the left-
hand side, and the strokes for numbers in the right-hand side
of the Graffiti writing area.
• Make sure that Graffiti is not shifted into extended or punc-
tuation modes. See the
SPT 1700 Product Reference Guide
for
information about shifting into and out of punctuation
modes.
Tapping the screen buttons or icons does not activate the
corresponding feature:
• Recalibrate the digitizer. Choose Digitizer from the Preferenc-
es application pick list and follow the directions on the screen.
When I tap the icon, nothing happens:
• Not all applications or screens have menus. Try changing to a
different application.
Beamed data does not transmit:
• Confirm that the SPT 1700 terminals are 5” apart, the receiver
has its IRDA capability enabled, and that the path between the
two devices is clear of obstacles.
When receiving beamed data an out of memory message appears:
• Your SPT 1700 terminal requires at least twice the amount of
memory available as the data you are receiving. For example,
if you are receiving a 30K application, you must have at least
60K free.
Your SPT 1700 unit does not accept scan input:
• Verify that the unit is loaded with a scanning application. See
your System Administrator.
• Check to be sure the bar code symbol is not defaced.
• Be sure you are within proper scanning range.