User Manual
Table Of Contents
- Introduction
- About This Guide
- Getting Started with the SPT 1700
- Installing the Battery
- Starting the SPT 1700
- Using the SPT 1700
- Scanning with the SPT 1700
- Initiate the Spectrum24 Network Connection
- Resetting Your SPT 1700 Terminal
- Attaching the Handstrap
- Maintaining the SPT 1700
- Troubleshooting
- SPT 1700 terminal does not turn on:
- Low battery warning after replacing the battery:
- No sound:
- SPT 1700 terminal turns itself off:
- SPT 1700 terminal doesn’t recognize my handwriting:
- Tapping the screen buttons or icons does not activate the corresponding feature:
- When I tap the icon, nothing happens:
- Beamed data does not transmit:
- When receiving beamed data an out of memory message appears:
- Your SPT 1700 unit does not accept scan input:
- Service Information
- Warranty
- Ergonomic Recommendations
- Regulatory Information
16
SPT 1700 Series
Maintaining the SPT 1700
Your SPT 1700 is designed to be reliable and to provide years of
trouble-free service. However, you should observe the following
general tips when using your SPT 1700:
• Take care not to scratch the screen of your SPT 1700. When
working with your SPT 1700, use the supplied stylus or plas-
tic-tipped pens intended for use with a touch-sensitive screen.
Never use an actual pen or pencil or other sharp object on the
surface of the SPT 1700 screen.
• Although your SPT 1700 is water and dust resistant, it should
not be exposed to rain or moisture for an extended period of
time. In general, treat your SPT 1700 as you would a pocket
calculator or other small electronic instrument.
• The touch-sensitive screen of your SPT 1700 contains a glass
element. Take care not to drop your SPT 1700 or subject it to
any strong impact.
• Protect your SPT 1700 from temperature extremes. Do not
leave your SPT 1700 on the dashboard of a car on a hot day,
and keep it away from heaters and other heat sources.
• Do not store or use your SPT 1700 in any location that is ex-
tremely dusty, damp or wet.
• Use a soft lens cloth to clean your SPT 1700. If the surface of
the SPT 1700 screen becomes soiled, clean it with a soft cloth
moistened with a diluted window-cleaning solution.