User's Manual

Stationary Reader User’s Manual  2001-2002 Matrics, Inc. Page 9
Installation Procedure
The Reader installation consists of the following steps:
1. Mount your antenna(s) in a location chosen for optimum operation. Make sure that you follow the
FCC guidelines for antenna placement. The antenna should be at least two (2) meters from any
unsuspecting personnel.
2. Mount the Reader on a wall near your antenna(s) locations.
CAUTION: The Reader must reside indoors, in operating range, and out of
direct sunlight, high moisture, or extreme temperatures.
3. Cable to connect the external antenna(s). Maximum cable length is 25’.
4. Cable to connect the Reader to the Host/PC.
5. Power On the Reader.
6. Configure the Reader using the Utility software provided in your package. Follow the prompts to
change your Readers’ factory-assigned xFF address to a unique address for communicating with
your Host/PC.