User Manual
Table Of Contents
- Cover
- Notices, Trademarks, and Statement of Rights
- Contents
- Section 1. Introduction
- Section 2. System Description
- Section 3. Specifications and Diagrams
- Section 4. Getting Started
- Section 5. Installation
- Section 6. Cautions, Notes, and Approvals
- Section 7. Warranties and Returns
- Section 8. Troubleshooting
- Section 9. Contact Us
Section 4. Getting Started
What’s Included?
Before you proceed with your Reader installation, check that you have all of the items you need.
Contact Matrics (refer to the “Contact Us” section in this User’s Manual) if any of the parts listed in
this section are missing from your Reader package, or any of the items you received are damaged.
NOTE: You should use ONLY those parts provided in your Reader
package or specifically recommended by Matrics. Do not substitute any
other cables, etc., since doing so may degrade your system’s
performance, damage your Reader, and void your warranty.
In addition to this User’s Manual, you should have received the following items in your package:
PART NUMBER (PN) QTY. DESCRIPTION
RDR-090 1 Long Range Reader
1 CAT3 cable termination block (“wiring block”)
1 3-foot data cable
In addition, you will need:
• Matrics Reader Networking Kit (PN: NKT-001) to connect the Reader to your host computer,
• A power supply for your Reader (such as PN: PWR-001, available from Matrics),
• (4) screws for mounting the Reader, and
• several wire ties to secure any extra lengths of cable.
6 Long Range Reader User’s Manual 2002 Matrics, Inc.