User's Manual

6 Stationary Reader User’s Manual 2001-2002 Matrics, Inc.
Section 4. Getting Started
What’s Included?
Before you proceed with your Reader installation, check that you have all of the items you need. Contact
Matrics (refer to the “Contact Us” section in this User’s Manual) if any of the parts listed in this section
are missing from your Reader package, or any of the items you received are damaged.
NOTE: You should use ONLY those parts provided in your Reader package
or specifically recommended by Matrics. Do not substitute any other
cables, etc., since doing so may degrade your system’s performance,
damage your Reader, and void your warranty.
In addition to this User’s Manual, you should have received the following items in your package:
In addition, you will need:
Matrics Reader Networking Kit (PN: NKT-001) to connect the Reader to your host computer,
A power supply for your Reader (such as PN: PWR-001, available from Matrics),
(4) screws for mounting the Reader, and
several wire ties to secure any extra lengths of cable.
PART NUMBER (PN) QTY. DESCRIPTION
RDR-001 1 Stationary Reader
1 CAT3 cable termination block (“wiring block”)
1 3-foot data cable