User Manual

© 2006 SYMBOL TECHNOLOGIES, INC. All rights reserved.
Symbol reserves the right to make changes to any product to improve reliability, function, or design.
Symbol does not assume any product liability arising out of, or in connection with, the application or use
of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right or
patent, covering or relating to any combination, system, apparatus, machine, material, method, or
process in which Symbol products might be used. An implied license exists only for equipment, circuits,
and subsystems contained in Symbol products.
Symbol and the Symbol logo are registered trademarks of Symbol Technologies, Inc. Other product names
mentioned in this manual may be trademarks or registered trademarks of their respective companies and
are hereby acknowledged.
Symbol Technologies, Inc.
One Symbol Plaza
Holtsville, N.Y. 11742-1300
http://www.symbol.com
Reference Documents
Supporting documents are available for viewing/download from the Symbol documentation web site:
http://www.symbol.com/manuals
Software updates, SDKs, development support and related documents are available from the Symbol
Devzone web site:
http://devzone.symbol.com
Patents
This product is covered by one or more of the patents listed on the web site:
http://www.symbol.com/patents
Warranty
For the complete Symbol hardware product warranty statement, go to:
http://www.symbol.com/warranty
Service Information
Before using the unit, it must be configured to operate in the facility network and run the required
applications. If a problem occurs using the equipment, contact the facility Technical or Systems Support
representative. If there is a problem with the equipment, they will contact the Symbol Support Center:
For the latest version of this guide and other supporting documentation, go to:
http://www.symbol.com/manuals
United States 1-800-653-5350
1-631-738-2400
Canada 905-629-7226
United Kingdom 0800 328 2424 Asia/Pacific +65-6796-9600
Australia 1-800-672-906 Austria/Österreich 01-5055794-0
Denmark/Danmark 7020-1718 Finland/Suomi 9 5407 580
France 01-40-96-52-21 Germany/Deutschland 6074-49020
Italy/Italia 2-484441 Mexico/México 5-520-1835
Netherlands/Nederland 315-271700 Norway/Norge +47 2232 4375
South Africa 11-809 5311 Spain/España
Inside Spain 91 324 40 00
Sweden/Sverige 08 445 29 00 Outside Spain +34 91 324 40 00
Latin America
Sales Support
1-800-347-0178 Inside US
+1-954-255-2610 Outside US
Europe/Mid-East
Distributor Operations
Contact local distributor or call
+44 118 945 7360
72-XXXXX-01
Revision A — XXX 2006
RFID Reader
Quick Reference Guide
XR400 / XR480
Introduction
This QRG (Quick Reference Guide) provides information for the XR Series RFID Readers. The QRG includes
LED definitions, port descriptions, and mounting information. For details, refer to the XR Series RFID
Reader Integrator Guide P/N 72E-71773-XX, available at: http://www.symbol.com/manuals
Product Description
The Symbol XR Series RFID Readers are intelligent, multi-protocol UHF RFID readers with RFID read
performance that provides real-time, seamless EPC-compliant tags processing.
Features:
UHF Generation 2 support (EPC Class 0 and Class 1 supported only in XR400)
Intel XScale
®
processor with Windows
®
CE
Support for custom or third-party applications
Feature set for event and tag management.
Firmware Updates
The XR SeriesXR Series RFID Readers are shipped with the current firmware version. To install the latest
upgrade refer to the XR Series Integrator Guide P/N 72E-71773-XX, available from:
http://www.symbol.com/manuals
Note: Ensure that power is not interrupted during a firmware upgrade.
LED Definitions
LEDs indicate reader status as described in the following table.
Physical Connections Ports
Mounting
For installation instructions refer to the XR Series Integrator Guide P/N 72E-71773-XX, available from:
http://www.symbol.com/manuals.
1. Position the XR reader on the wall or shelf, ensuring a minimum clearance of five inches on all
sides. Orient the XR reader vertically with the ports at the bottom and ensure that all connected
cables hang straight down.
2. Mark the hole locations using the mounting tabs as a guide. Remove the XR400 and drill four
mounting holes at the marked locations.
3. Reposition the XR reader over the mounting holes and secure using fasteners appropriate for the
surface material.
LED Indication
Green Reader is powered on.
Red Error condition or non-operational mode, e.g., boot-up.
Yellow Successful tag read.
USB Client
10/100BaseT Ethernet
GPIO
Power
LEDs
Antenna (Reverse TNC) USB Host RS232
Mounting
Tabs
Mounting
Tabs
Reset Button
Port Description
Antenna (Reverse TNC) XR400/XR480 - Supports up to eight antennas (four transmit, four receive).
XR480 - Supports up to eight transceiver antennas.
10/100BaseT Ethernet Insert a standard RJ45 Ethernet cable for connection to an Ethernet network.
Insert a cross-connect Ethernet cable for connection to a local PC.
USB Client For future expansion.
USB Host Support for USB Flash drives, USB screen.
RS232 For serial console only.
GPIO Insert a DB15 serial cable for connection to an external device.
Power Connect the Symbol approved power supply (see Power Supply for the Symbol
approved power supply). The power supply uses an AC adapter that varies
depending on the country. Maximum power consumption: 24 VDC, 1.2 A.

Summary of content (2 pages)