User Manual
Table Of Contents
- About This Guide
- Introduction
- Getting Started
- Installation and Communication
- Administrator Console
- Maintenance and Troubleshooting
- Specifications
XR400 RFID Reader Integrator Guide4-4
5. Click Communication.
Figure 4-2. Communication Configuration Window
6. Change communication-related settings as desired by entering information in the text boxes or using the drop-down lists.
See Table 4-3 for descriptions of available options.
7. Click Set Properties.
8. Click Main to return to the Administrator Console main window.
9. Click Commit / Revert.
10. Click Commit to save the changes or Discard to discard the changes. See Committing / Discarding Changes on page 3-27.
Table 4-1. Communication Configuration Options
Setting Description Possible Values
Obtain IP Address via DHCP The Dynamic Host Configuration Protocol server running on networks
can assign a dynamic IP address to the host and readers. Contact the
system administrator to find out if the network supports DHCP.
Checked (enabled) / unchecked (disabled)
Enable HTTP Server Select whether to enable the web interface. Checked (enabled) / unchecked (disabled)
Enable Telnet Server Select whether to enable Telnet to the reader. Checked (enabled) / unchecked (disabled)