User Manual
Table Of Contents
- About This Guide
- Introduction
- Getting Started
- Installation and Communication
- Administrator Console
- Maintenance and Troubleshooting
- Specifications
XR400 RFID Reader Integrator Guide3-30
User Maintenance
To modify the access level or other account parameters and settings for an existing user:
1. Click Manage Users.
Figure 3-27. Modifying Users Window
2. To assign the default password (change) to a user, select the user from the User List, select the Clear Password radio button,
and click Modify User.
3. To delete the user, select the user from the User List, select the Delete User radio button, and click Modify User.
4. To assign a new password to the user, select the user from the User List, select the Change Password radio button, and click
Modify User. In the window that appears, enter the old user password, then enter and confirm the new password.
5. To change the access level of the user, select the Set to View Only Access, Set to Edit Access, or Set to Maintenance Access
radio button. Note that you can not grant an access level higher than your own.