User Manual
Table Of Contents
- About This Guide
- Introduction
- Getting Started
- Installation and Communication
- Administrator Console
- Maintenance and Troubleshooting
- Specifications
Administrator Console 3-25
Configuring Individual Read Points
The Reader Configuration window also allows configuring and managing read points connected to the reader. To manage an antenna:
1. Select the specific read point from the Reader Configuration window, shown in Figure 3-21.
2. Clicking on a specific read points opens up the following window that allows you to associate that read point with a class
and a read point zone.
Figure 3-23. Modify Read Point Configuration Window
3. If desired, enter a new name and description in the Name: and Description: fields.
4. Select an associated read point class and zone from the Class: and Zone: drop-down lists.
5. Click Commit/Revert to save the changes. See Committing / Discarding Changes on page 3-27.