User Manual
Table Of Contents
- About This Guide
- Introduction
- Getting Started
- Installation and Communication
- Administrator Console
- Maintenance and Troubleshooting
- Specifications
XR400 RFID Reader Integrator Guide3-12
Writing a Tag
Use the Write a Tag option to perform the following with a R/W tag:
• Write, erase, and/or lock the tag ID.
• Write, erase, and/or lock the user data.
• Write or lock a kill code.
• Kill a tag.
To write a tag:
1. Click Write a Tag.
Figure 3-11. Write an RFID Tag Window
2. Enter the TagID to write on the tag. If the tag already contains an ID, select the Erase and Write checkboxes next to the Tag
ID field to overwrite it.
To disable changes of the tag ID select the Lock checkbox next to the Tag ID field.
3. Enter the data to write on the tag in the User Data field. If the tag already contains user data select the Erase and Write
checkboxes next to this field to overwrite it.
To disable changes of the user data select the Lock checkbox next to the User Data field.