User Manual

Administrator Console 3-5
Scan Control
Click Scan Control on the Console main menu to view the Scan Control window, which allows initiating an on-demand scan and
enabling / disabling polled read points. For periodic read points, the window displays when the next scan is scheduled.
Figure 3-4. Scan Control Window
To initiate a scan for on-demand read points click Initiate Scan.
To enable or disable polling for polled read points click Enable Polling or Disable Polling.
Reader Information
System Clock “[Weekday] [Month] [Day of the Month]
[Hour:Minute:Second] [Year]
Time of the reader system clock. Click on this to change the time of the reader
system clock.
System Up Time “[Number of Day] [Number of Hour]
[Number of Minute] [Number of Second]
The length of time that the reader has been running.
Memory Usage Number of bytes Total amount of device memory, and amount of memory in use and available.
Flash Usage Number of bytes Total amount of flash memory, and amount of memory in use and available. Also
broken down by flash partitions (application, platform, and data).
Automatic Enable Period Minutes After the specified number of minutes the system attempts to enable any degraded
device that was system-disabled.
Table 3-1. Reader Status Window Elements (Continued)
Item Value Format Description