User Manual

XR400 RFID Reader Integrator Guide3-4
Status
Click Status on the Console main menu to view the Reader Status window, which displays information about read points and the
XR400’s kernel.
Figure 3-3. Reader Status Window
Table 3-1 describes the elements in the Reader Status window.
Table 3-1. Reader Status Window Elements
Item Value Format Description
Reader and Read Points
Total Number Number of readers connected. Since a single reader is connected to the
Administrator Console, this number is always 1
Enabled Number Total number of readers enabled for reading. Since a single reader is connected to
the Administrator Console, this number is always 1 or 0 (if the reader is disabled).
User Disabled Number Number of user-disabled readers / read points. This value is always 1 or 0.
For information on how to disable readers, see Renaming, Enabling, and Disabling
the Reader on page 3-23.
System Disabled Number Number of system-disabled readers / read point. If a device becomes non-
operational, the system disables it, but allows other system components to
continue to operate. This value is always 1 or 0.
Parent Disabled Number Devices dependent on a non-operational parent device are marked Parent
Disabled. For example, when a reader is system-disabled, its read points are
marked parent disabled.