User's Manual
Table Of Contents
- 1.0 Revision History
- 2.0 Introduction
- 3.0 General Description
- 4.0 References
- 5.0 Product Level Specifications
- 6.0 Applicable Approvals
- 7.0 Approvals and Safety Summary
- 8.0 General
- 1.0
- 1.0
- 1.0
- 1.0
- 1.0
- 1.0
- 1.0
- 9.0 Interfaces
- 10.0 Electrical Characteristics
- 11.0 Software Features and Functions
- 12.0 Host Software
- 13.0 Mechanical & Ergonomic Specifications
- 1.0
- 14.0 Appendices
Doc #: PD001743A01 Rev. B.0
Symbol Solutions, Inc. Page 22 of 22
Symbol Confidential Restricted
14.0 Appendices
Radio Performance Specifications
14.1 General
Frequency Range:
435-470 MHz [high band – FCC, IC, EU, & other]
403-435 MHz [low band – non-FCC, non-IC]
Frequency Control:
Synthesized
Channel Spacing:
12.5 kHz [FCC & others]
20 kHz [non-FCC]
25 kHz non Part 90
Mode of Operation:
Simplex or Half Duplex
Regulated Supply Voltage:
3.7VDC +/- 15%
Operating Temperature
Range:
-30C to +80C
Maximum Dimensions:
64 (W) x 52.5 (L) x 17.1 (H) mm
Weight:
37.1g
FCC Compliance:
Yes [high band only – 435-470 MHz]
No [low band]
14.2 Receiver
Bandwidth:
35 MHz [high band]
32 MHz [low band]
Frequency Stability:
+/- 1ppm [-30C to + 80C]
Digital Sensitivity
0.4uV at 1% BER [at 12.5 kHz channel spacing]
as per ETSI
EN300 113-1 v 1.7.1
RF Input Impedance
50 ohms
Selectivity
-61 dB [12.5 kHz channel spacing]
Spurious Rejection
88 dB
Intermodulation
-70dB
Conducted Spurious
85 dB
Receive Current Drain
200 mA
Receive Attach Time
< 3.5 msec
14.3 Transmitter
Bandwidth:
35 MHz [high band]
32 MHz [low band]
Frequency Stability:
+/- 1ppm [-30C to + 80C]
TCXO coupling
AC
RF Output Power
1W nominal
0.5W [available for non-FCC variant]
RF Output Impedance
50 ohms
Modulation Distortion
< 3%
Maximum Duty Cycle
30%, 60 seconds maximum continuous transmit time
Transmitter Attack Time
< 3.5 msec
Spurious & Harmonic FM
-79 dB
Transmit Current Drain
1.5A at 3.7 VDC nominal
14.4 Host Interface
Data Input Impedance
100 Kohms