User's Manual
Table Of Contents
- 1.0 Revision History
- 2.0 Introduction
- 3.0 General Description
- 4.0 References
- 5.0 Product Level Specifications
- 6.0 Applicable Approvals
- 7.0 Approvals and Safety Summary
- 8.0 General
- 1.0
- 1.0
- 1.0
- 1.0
- 1.0
- 1.0
- 1.0
- 9.0 Interfaces
- 10.0 Electrical Characteristics
- 11.0 Software Features and Functions
- 12.0 Host Software
- 13.0 Mechanical & Ergonomic Specifications
- 1.0
- 14.0 Appendices
Doc #: PD001743A01 Rev. B.0
Symbol Solutions, Inc. Page 20 of 22
Symbol Confidential Restricted
12.3 Site Survey (terminals only)
A site survey application shall be developed for RA1202 that will perform in a similar manner to
the site survey application available on 7530 G2 and 8525/8530 G2 terminals. This is used by
system installers to determine the best location of base stations for new NarrowBand sites. It also
indicates the coverage level.
12.4 Software Update feature
Software is available to upgrade RA1202 firmware through UART host connection, for in-
system upgrade and depot upgrade.
As a backup in case of flash corruption and serial interface no longer operational it is possible to
update firmware through JTAG programming interface.
Only firmware which Regulatory Agency approved can be loaded on the radio module.
13.0 Mechanical & Ergonomic Specifications
13.1 General
Interface to Host: 54-pin Samtec ASP-176298-02
(8.7mm custom pin lengths of Samtec FTE-125-xx-G-DV-A-P-TR series)
Antenna Cable Interface: Hirose U.FL-R-SMT(10)
Weight: 37.1g
Dimensions: 64 (W) x 52.5 (L) x 17.1 (H) mm
13.2 Drop Rating
This is highly dependent upon host mounting system. For RA1202 Radio module integrated into
MSI XT15 handheld terminal the following drop specifications are met:
26 drops from 1.7m at room temperature to polished concrete
6 drops from 2.0 m at room temperature to polished concrete
6 drops from 1.7 m at -20C to polished concrete
6 drops from 1.7m at +50C to polished concrete