User's Manual

Doc #: PD001743A01 Rev. B.0
Symbol Solutions, Inc. Page 11 of 22
Symbol Confidential Restricted
a. Modular compliance and approval as per RSS-119 section (IEC-003)
unintentional emissions.
iii. ETSI EN 300-113 Compliance
iv. ETSI EN 300-220 Compliance
v. FCC, IC, ETSI – coexistence of Radio Approvals
a. When RA1202 radio module is integrated into XT15 and VH10 host devices,
coexistence of NB Radio with WLAN and BT as applicable by:
i. FCC CFR47 Part 90 (Tx harmonics) and Part 15 subpart B class B
ii. Industry Canada RSS-190 (IEC003) Tx harmonics
iii. All SAR (FCC bulletin 65, EN 50392, Australian SAR ‘Radiocomms
(EMR - Human Exposure) Standard 2003 - amended 2007 & EMR SAR
ARPANSA Radiation Protection’)
iv. EMC EN 301 489-1-17-5
v. EMI EN 55022 class B
vi. EU WiFi radio 2.4GHz type EN 300 328 Tx harmonics
vii. EU WiFi radio 5GHz type EN 301 893 Tx harmonics
vi. Australian/New Zealand standard AS/NZS 4768.1:2010.
vii. Malaysian Communications and Multimedia Commission standard to be used in Land
Mobile Services as per SKMM WTS LMR 1.01:2007.
viii. RA1202 when integrated into XT15 and VH10 hosts
a. ETSI EN 301 489-1-17-5. CE Mark Compliance.
ix. Safety
a. EC Low Voltage Directive 73/23/EEC, but no voltage limit applying.
x. Flammability Rating
a. The PCB used for the RA1202 radio module is UL94-V0 (or better) rated.
xi. Symbol Solutions Inc W18 environmental compliance, which is a superset of RoHs,
REACH, China RoHs, Conflict materials and PVC content.
7.0 Approvals and Safety Summary
This equipment complies with Class B Part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may
cause undesired operation.