User's Manual

Doc #: PD001743A01 Rev. B.0
Symbol Solutions, Inc. Page 10 of 22
Symbol Confidential Restricted
5.7 RF Connectivity
 Frequency range:
- 403 - 435 MHz, 435 – 470 MHz
 Data rate & mode
Error! Bookmark not defined.
:
 2 level FSK 4800 bps,
1
 2 level FSK 9600 bps
 4 level FSK 9600 bps
 4 level FSK 19.2 Kbps
 RF Power: Factory set to 0.45 watt (non-US) or 1 watt
 Channel Spacing:
 12.5 KHz
 20 KHz (non-US & Canada)
 25 KHz (not for Part 90)
 Sensitivity
2
:
 0.5uV nominal @ 1% BER [12.5 kHz] or better
 0.7uV nominal @ 1% BER [20/25 kHz] or better
5.8 Unsupported Features
The following features are not supported by the RA1202 radio module:
 TelkTalk is not supported.
 Intrinsically Safe is not supported
 Formal MTBF – Formal calculations to MIL-HDBK-217F will not be provided
 Non-cellular protocol is not supported
 Not backward compatible to 9130 and 9140 base stations for 2 level modulations
only.
6.0 Applicable Approvals
The RA1202 is pending submission for approval for the following certifications:
i. FCC Compliance and Approval
a. Modular compliance and approval as per CFR47 Part 90, 22, 74, 80 and Part 15.
ii. Industry Canada Compliance and Approval
1
Effective peak data rate
2
Above are radio module only receiver sensitivity outside of a host. Host receiver sensitivity depends on host EMC
characteristics.