User's Manual

Laser Devices
Symbol products using lasers comply with US 21 CFR1040.10, Subchapter J and IEC
825/EN 60 825 (or IEC 825-1/EN 60 825-1, depending on the date of manufacture). The
laser classification is marked on one of the labels on the product.
Class 1 Laser devices are not considered hazardous when used for their intended
purpose. The following statement is required to comply with US and international
regulations:
Caution: Use of controls, adjustments or performance of procedures other than those
specified herein may result in hazardous laser light exposure.
Class 2 laser scanners use a low power visible light diode. As with any very bright light
source such as the sun, the user should avoid staring directly into the light beam.
Momentary exposure to a Class 2 laser is not known to be harmful.
RF Devices
Symbol’s RF products are designed to be compliant with the rules and regulations in the
locations into which they are sold and will be labeled as required. The majority of
Symbol’s RF devices are type approved and do not require the user to obtain license or
authorization before using the equipment. Any changes or modifications to Symbol
Technologies equipment not expressly approved by Symbol Technologies could void the
user’s authority to operate the equipment.