User Manual

Installation for Windows
Getting Started in Windows NT
WaveLAN/IEEE Turbo 11 Mb PC Card 3-7
Figure 3-1 Enable the PCMCIA service for Windows NT
4. Click the button “Startup” on the right side of the “Devices”
window, and set the Startup type for the item PCMCIA to
“Boot”.
5. Click “OK” to confirm and return to the “Devices” window.
6. Click “Close” to return to the Control Panel.
Enabling Network Support 3
To introduce your WaveLAN network adapter card to the Windows
NT operating system, you will need to enable Network support for
your WaveLAN station.
1. From the Windows NT Taskbar, click the button.
2. Click on Settings, then Control Panel.
3. In the Control Panel window, double-click the “Network” icon to
open the “Network Settings” window.
■ If no network has been installed yet, you will be prompted
to install it now.
Click “Yes” to install Windows NT Networking, and follow
the instructions as they appear on your screen.
■ If networking support was already installed, you will see a
window with multiple tabs.
Select the tab “Adapters”, and click the “Add” button.