User Manual

Installation for MS-DOS
Advanced Options
WaveLAN IEEE 802.11 PC Card User’s Guide D-29
DEVICE=c:\dos\emm386.exe noems x=xxxx-xxxx
1
DEVICE=c:\dos\setver.exe
[WaveLAN]
REM This menu item will enable WaveLAN Card Access Driver
DEVICE = c:\wavelan\wavecad\wvlancad.sys /m=xxxx /b=xxxx /i=xx
2
[CSSS]
REM This menu item will enable Card and Socket Services
DEVICE=c:\csss\socksvce.exe
3
DEVICE=c:\csss\cardsvce.exe
[COMMON]
DEVICE=c:\windows\ifshlp.sys
AUTOEXEC.BAT File D
SET TEMP=c:\temp
PROMPT $P$g
SET DIRCMD=/O/P
GOTO %config%
:WaveLAN
REM This section contains WaveLAN related commands
PATH c:\dos;\c:\wavelan;c:\network\wavelan
4
;c:\windows
c:\network\wavelan\startnet
goto end
:CSSS
REM This section contains Card and Socket Services related commands
PATH c:\dos;\c:\wavelan;c:\network\ethernet\
5
;c:\windows
1 See page D-19
2 See “Intel 82365 PCIC” on page D-5
3 The program path and file names should match the actual path and file
names of your Card Services and Socket Services (CS&SS) software.
4 Path to the “NET.CFG” file that contains the parameter values for your
WaveLAN card.
5 Path to the second “NET.CFG” file that contains the parameter values for
an Ethernet card.